QM-THREAD
The QMSOFT®/QM-THREAD program is used for computer-aided testing of threads or gauges for thread testing. The generation of all required thread (gauge) target values for the following standards is supported.
QM-TAPERTHREAD
The inspection program QMSOFT®/QM-TAPTHREAD is designed as a support system for the computer aided inspection for taper pipe threads and taper thread gauges.
QM-SPLINE
The inspection program QMSOFT®/QM-SPLINE is designed for the inspection of involute and straight sided spline gauges according to different national standards, respective according to customized factory standards.
QM-SCALE
The inspection program QMSOFT®/QM-SCALE is designed for the inspection of graduated steel rules according to DIN 865, DIN 866, BS 4372 as well as the inspection of measuring tapes according to DIN and European standards. An inspection according to customized factory standards is also possible.
QM-PRESS
The inspection program QMSOFT®/QM-PRESS is designed for the inspection of pressure gauges and pressure switches according to DIN EN 837. The gauges may be designed for different measuring principles (bourdon tube gauges, diaphragm or capsule gauges etc.), for different working and inspection mediums (air, water, oxygen, fuel oil etc.) or may differ in the way they are build (without pointer stop, pointer stop at zero position etc.).
QM-PLAIN
The inspection program QMSOFT®/QM-PLAIN is designed for the inspection.
QM-TORQUE
The inspection program QMSOFT®/QM-TORQUE is designed for the inspection of indicating and setting hand torque tools according to DIN ISO 6789 or self defined factory standards. The permissible tolerances will be determined according to ISO 6789 or according to your own factory standards. The program does provide the functions necessary to define your own tolerance values and to set the evaluation method.
QM-DIAL
The inspection program QMSOFT®/QM-DIAL is used for computer aided inspection of dial gauges, dial indicators and dial test indicators. It was designed to support the inspection of this gauges according to the worldwide mostly used standards.
QM-MICRO
The inspection program QMSOFT®/QM-MICRO is designed to support the inspection of micrometers according to DIN 863, VDI/VDE/DGQ guideline 2618 (pages 5,6,14,15), the Federal specification GGG-C-105C, the British Standards BS 870 „External micrometer“, BS 6468:1984 for depth micrometers, BS 959 „Internal micrometers“, respective according to customized factory standards.
QM-BLOCK
The inspection program QMSOFT®/QM-BLOCK is designed for the computer supported inspection of gauge blocks used as single gauge blocks or as gauge block sets. Different evaluation methods are possible (evaluation of centre length deviation or the deviation range combined with the centre length deviation). Basically the evaluation and the used tolerances are related to the ISO 3650 standard, the ANSI/ASME B89.1.9, the British standard BS 4311 or the Australian standard AS 1457. To define customized tolerance tables with user defined accuracy classes is also possible.
QM-PIN
The inspection program QMSOFT®/QM-PIN is designed for the computer aided inspection of cylindrical measuring pins (used as single pins or pin sets), thread check wires and sets of thread check wires used for the measurement of external threads according the “Three-wire-method”, feeler gauges or other sets of gauges.
QM-BORE
The inspection program QMSOFT®/QM-BORE is designed for the inspection of bore gauges with 2-Point contact – with split ball or moveable measuring bolt – and for the inspection of indicating plug gauges based at the regulations of the German VDI 2618 rules, Page 13.2. The program does enable the gauge valuation according to the VDI 2618 rules, Page 13.2 as well as according to your own factory tolerances. The management of these customized tolerance tables is a part of the program.
QM-COMP
The inspection program QMSOFT®/QM-COMP is designed for the inspection of gauge block coparator devices with the help of a special 11-piece-gauge block set. The inspection procedure is implemented to the German paper DKD-R 4-1 “Auswahl und Kalibrierung von Endmaßmessgeräten zur Verwendung als Normalgeräte in Kalibrierlaboratorien”.
QM-DEVICE SERVER
Efficient and convenient measurement means the online take-over of measurements from a connected measuring device. Therefore, the QMSOFT® system offers with the label QMSOFT®/QM-DeviceServer different program modules performing the online communication with all common measuring instruments.
QM-GAUGECAL
The calculation program QMSOFT®/QM-GAUGECAL is designed for the computer aided calculation of nominal values and tolerances for fixed gauges.
QM-CALIP
The inspection program QMSOFT®/QM-CALIP is designed to support the inspection of calipers according to different national standards (see the list ), respective according to customised factory standards. From the measured data the program determines the errors of external, internal and depth measurement of the inspected calliper.